Swing Check Valve 입니다.

Appropriate use in accordance to designed capabilities: RHEA R1C swing check valves are designed to block media on one side of the pipe within allowable pressure and temperature limits and to be installed in a pipe system only.

They may be used only with media, which the material and the seals are resistant to.

They are not suitable for media with solid components.

Storage: Swing check valves include sealing elements consisting of organic material, that reacts to environmental effects.

Therefore, they are to be stored in their original packaging in a place, which is also to be kept as cool, dry and dark as possible.

The front and back sides of the swing check valves must not be mechanically damaged.

Transport: The personnel must pay special attention, when big swing check valves (>DN 100) are unpacked and transported.

The valve is to be held in a horizontal position in a way, that it can open at the top only.

This is to avoid, that the valve unintentionally drops down and is damaged.

.